How does a granite stone cutting machine work?

The Background of Granite block cutting machine

Stone is a very durable and beautiful material that is widely used for construction, carving and decoration. However, handling stone requires a high degree of skill and experience because it is very hard and difficult to work with. To solve this problem, granite block cutting machine have been invented to make cutting stone easier and faster.

Step 1: Preparation

First of all, you need to prepare a granite block cutting machine and a piece of granite stone. Make sure your cutter is on a smooth ground and has been powered on. Check the size and shape of the stone and determine the position and direction you need to cut. Then, put on gloves and goggles to ensure safety.

Step 2: Adjust the granite block cutting machine

Next, you need to adjust the depth and angle of the block cutter. The depth determines how deep the cutting tool enters the stone, while the angle determines the direction of the cutting tool. Make adjustments as needed.

Step 3: Install the stone block cutting machine

Attach the cutting tool to the cutter. Typically, a drill is used for initial hole drilling and then a saw blade is used for cutting. Select the correct cutter as needed and follow the instructions for installation. Make sure the cutter is securely fastened.

Step 4: Cutting

Now you are ready to start cutting the stone. Place the stone on the table of the cutter and secure it. Adjust the depth and angle of the cutter as needed. Then, press the switch to make the cutting tool start cutting the stone. During the cutting process, keep it stable and smooth to avoid applying excessive pressure that may damage the stone or the cutter. If you need to change the direction or position of the cut, stop the block cutting machine and make adjustments.

Step 5: Clean up

After finishing cutting, turn off the granite block cutting machine and remove the cutter from the cutter. Then clean the block cutting machine and table to remove stone chips and dust. After cleaning, remove the stone from the work table and sand and finish it with sandpaper or abrasive head to make the surface smooth and