Maintenance Guide for Blocks Cutting Machine

Stone cutting machine is an important piece of equipment that is widely used in the stone industry, through which stone blocks can be efficiently cut into the required size and shape. However, the life of the machine may be shortened and various malfunctions may occur if proper maintenance is not carried out during use. In this article, we will present you with a maintenance guide for stone cutting machines that will help you to use and maintain your machine properly to ensure its efficient operation for a long time.

1. Cleaning and lubrication

Regular cleaning and lubrication are key to keeping your stone cutting machine running properly. Firstly, you need to regularly clean the machine of dust and debris, especially the area around the cutting knives. Use compressed air or a soft brush to blow or brush out the dust, ensuring good ventilation and avoiding dust getting inside the machine. Also, the knives and guides should be lubricated with a suitable lubricant to minimise friction and wear.

2. Cutting tool replacement

The cutting tool is the core component of the stone cutting machine and will wear and fail after a long time of use. Therefore, it is very important to check and replace the cutting tools regularly. Depending on the frequency of use and the hardness of the stone, you can make a plan to change the cutting tool to ensure the cutting quality and efficiency. When replacing the cutter, make sure to follow the requirements in the operation manual and pay attention to safety matters.

3. Inspection of electrical systems

The electrical system of the stone cutting machine is the key to its proper operation. Regularly check that the electrical connections are secure and that the wires are not broken or aged. At the same time, check whether the operation status indicators and switches on the electrical control panel are working properly. If you find any malfunction or abnormality, stop the machine immediately and seek help from professional maintenance personnel.

In short, proper maintenance is critical to the long life and efficient operation of your stone cutting machine. By regularly cleaning and lubricating, replacing cutting knives in a timely manner, and regularly checking the electrical system, you can ensure that your stone cutting machine stays in good working order. We hope this maintenance guide has been helpful and that your equipment is always in top condition!